No Run No Drip

Titebond No-Run, No-Drip Wood Glue is the thickest, fastest-drying glue available for use with porous and semi-porous materials. It is ideal for finish trim, crown moulding, baseboards, window casings and other applications requiring a professional-strength, no-run wood glue.
Titebond No-Run, No-Drip provides a strong initial tack and fast speed of set, yet allows realignment of working pieces. It also develops a bond stronger than the wood itself, offers excellent sandability and is unaffected by finishes.

Where to buy

Features

  • Thick – No-runs, No-drips
  • Versatile – Bonds most porous and semi-porous materials
  • Fill small cracks and gaps
  • Strong initial tack – Fast set
  • Unaffected by finishes
  • Excellent sandability
  • Good heat resistance
  • Nonflammable – No offensive odor

Resources

Part number Size Weight UPC Case UPC Units per package Packages per pallet
512404V 473ml 0.57kg 037083024043 10037083024040 12 100
Scroll right for more information
Type Thixotropic polyvinyl acetate
State High-viscosity liquid
Colour Beige
Dried film Translucent
Solids 60%
Viscosity 36,500 cps
Storage life 24 months in tightly closed containers at 24°C
Calculated VOC 2.4g/L
Weight per gallon 4.08kg
Chalk temperature Approximately 10°C
Flashpoint > 93°C
Freeze/thaw stability Stable up to 2 cycles
pH 4.8
Bond strength Green Seal GS-36 Woodworking Glues

The standard includes product performance requirements and environmental and health requirements such as reduced toxicity, hazardous ingredients, and volatile organic compounds (VOCs).

Bond strength ASTM D905 (on hard maple)

This test method covers the determination of the comparative shear strengths of adhesive bonds used for bonding wood and other similar materials, when tested on a standard specimen under specified conditions of preparation, conditioning, and loading in compression. This test method is intended primarily as an evaluation of adhesives for wood. This specification is designed to cover comparative shear strengths of adhesive bonds used for bonding wood or other similar materials, when tested on a standard specimen under the subscribed conditions of preparation, conditioning and loading in compression. This test method is intended primarily as an evaluation for wood adhesives

Bond strength ASTM D4236

This practice describes the standard procedure for developing precautionary labels for art materials to provide chronic health hazard and precautionary statements based on knowledge that exists in the scientific and medical communities. These statements concern hazards known to be associated with a product or product component(s) when it is present in a physical form, volume, or concentration that in the opinion of a toxicologist has the potential to produce a chronic adverse health effect

Application Temperature
Above 10°C.

Open Assembly Time
3-5 minutes (21°C./50%RH)

Total Assembly Time
10-15 minutes (21°C./50%RH)

Minimum Required Spread
Approximately 6 square meters per litre

Required Clamping Pressure
Enough to bring joints tightly together (generally, 100-150 psi for softwoods,125-175 psi for medium woods and 175-250 psi for hardwoods)

Method of Application
Plastic bottles for fine applications; glue may also be spread with a roller spreader or brush.

Cleanup
Damp cloth while glue is wet. Scrape off and sand dried excess.

Titebond No-Run, No-Drip Wood Glue is not intended for exterior use or where moisture is likely. For exterior applications, use Titebond III Ultimate Wood Glue or Titebond II Premium Wood Glue. Not for structural or load bearing applications. Do not use when temperature, glue or materials are below 50°F. Freezing may not affect the function of the product but may cause it to thicken. Agitation should restore product to original form. Read MSDS before use. KEEP FROM FREEZING. KEEP OUT OF THE REACH OF CHILDREN.

No caution information is needed. Please refer to the Safety Data Sheet for further information.