Titebond Polyurethane Liquid glue is a breakthrough in adhesive technology. It is the only polyurethane glue to combine a long 20 minute working time with a short 45 minute clamp time. It is a versatile, professional-strength glue specifically formulated for multi-purpose applications. In addition to its superior wood-to-wood performance, Titebond Polyurethane glue is ideal for metals, ceramics, most plastics, HPL, CorainTM, stone and other porous/non-porous materials. It is ready-to-use, offers excellent sandability and is unaffected by finishes.Where to buy
|Part number||Size||Weight||UPC||Case UPC||Units per package||Packages per pallet|
|Storage life||12 months in tightly closed containers at 24°C|
|Calculated VOC||0 g/L|
|Weight per gallon||4.30kg|
The standard includes product performance requirements and environmental and health requirements such as reduced toxicity, hazardous ingredients, and volatile organic compounds (VOCs).Bond strength ASTM D905 (on hard maple)
This test method covers the determination of the comparative shear strengths of adhesive bonds used for bonding wood and other similar materials, when tested on a standard specimen under specified conditions of preparation, conditioning, and loading in compression. This test method is intended primarily as an evaluation of adhesives for wood. This specification is designed to cover comparative shear strengths of adhesive bonds used for bonding wood or other similar materials, when tested on a standard specimen under the subscribed conditions of preparation, conditioning and loading in compression. This test method is intended primarily as an evaluation for wood adhesivesBond strength ASTM D4236
This practice describes the standard procedure for developing precautionary labels for art materials to provide chronic health hazard and precautionary statements based on knowledge that exists in the scientific and medical communities. These statements concern hazards known to be associated with a product or product component(s) when it is present in a physical form, volume, or concentration that in the opinion of a toxicologist has the potential to produce a chronic adverse health effectBond strength ASNI/HPVA Type I Water-Resistance : Wood glues
Type I testing is a Boil test and involves cutting the 150 x 150mm block assemblies into 25 x 75mm specimens, boiling them for 4 hours, then baking in a 145°F oven for 20 hours. They are boiled for an additional 4 hours, then immediately cooled using running water. The specimens are sheared while wet, and the bonds must pass certain strength and wood failure requirements to pass the Type I specification. Also Similar to D3 European standard testing.Bond strength ANSI/HPVA Type II Water-Resistance : Wood glues
Type II testing is a soak test, involving cutting the 150 x 150mm glued block assemblies into 50 x 125mm specimens, soaking them for 4 hours, then baking in a 120°F oven for 19 hours. This is repeated for a total of three cycles, and the bonds must not de-laminate to pass the Type II specification. Also similar to D2 European standard testing.
Assembly Time After Glue Application
25-30 minutes (21°C./50%RH)
Minimum Required Spread
Approximately 6. square meters per litre
Required Clamping Pressure
Enough to bring joints tightly together (generally, 30-80 psi for HPL, 100-150 psi for softwoods, 125-175 psi for medium woods and 175-250 psi for hardwoods).
Method of Application
Easily spread with a roller, spreader or brush. *NOTE: This product cures by reaction with moisture. Changes in humidity, temperature and moisture content of the glued surfaces will affect open time and minimum clamp time. Maximum open time can be determined by excessive foam development in the adhesive. Minimum clamp time can be determined when squeeze out of adhesive becomes firm.
Mineral spirits while glue is wet. Scrape or sand off dried excess.
Titebond Polyurethane Glue is not for structural applications or for use below the waterline. For ease of application, the glue, temperature and materials to be bonded should be above 10°C. Lower temperatures will cause the glue to thicken.
WARNING: EYE AND SKIN IRRITANT. POTENTIAL SKIN AND RESPIRATORY SENSITIZER. Contains isocyanate containing polymers. Contact causes eye irritation. Prolonged or repeated skin exposure may cause irritation and sensitisation or allergic reaction. Contact may stain skin. Do not allow eye contact. Avoid prolonged or repeated contact with skin. In case of eye contact, flush immediately with plenty of water for at least 15 minutes and seek medical attention. For skin, wash thoroughly with soap and water. For additional information, refer to Safety Data Sheet. KEEP OUT OF THE REACH OF CHILDREN