Titebond Original

Titebond Original is the fastest setting, high-quality aliphatic resin emulsion adhesive. It dries very rapidly to give a short clamp time and has high solvent-resistance. Original is excellent for sandable general purpose assembly for particle board, MDF, plywood and other porous materials as well as edge and face gluing of hardwoods and softwoods. It is preferred by musical instrument makers around the world.

Where to buy

Features

  • Fast set – Shortens clamp time
  • Bonds stronger than wood
  • Minimal or no creep
  • Solvent-resistant
  • Excellent sandability
  • Unaffected by finishes
  • Easy cleanup with water
  • FDA approved for indirect food contact
  • Perfect for assembly where short cure and open time is desired

Resources

Part number Size Weight UPC Case UPC Units per package Packages per pallet
515062V 237ml 0.30kg 037083050639 10037083050636 12 160
510313V 473ml 0.57kg 037083050646 10037083050643 12 100
510006V 946ml 1.18kg 037083050653 10037083050650 6 88
510314V 3.785lt 4.44kg 037083050660 10037083050667 2 63
510324V 19lt 22.2kg 037083050677 1 24
Scroll right for more information
Type Aliphatic resin emulsion
State Liquid
Colour Yellow
Dried film Translucent
Solids 46%
Viscosity 3,200 cps
Storage life 24 months in tightly closed containers at 24°C
Calculated VOC 10.7 g/L
Weight per gallon 4.17kg
Chalk temperature Approximately 10°C
Flashpoint > 93°C
Freeze/thaw stability Stable
pH 4.0
Bond strength Green Seal GS-36 Woodworking Glues

The standard includes product performance requirements and environmental and health requirements such as reduced toxicity, hazardous ingredients, and volatile organic compounds (VOCs).

Bond strength ASTM D905 (on hard maple)

This test method covers the determination of the comparative shear strengths of adhesive bonds used for bonding wood and other similar materials, when tested on a standard specimen under specified conditions of preparation, conditioning, and loading in compression. This test method is intended primarily as an evaluation of adhesives for wood. This specification is designed to cover comparative shear strengths of adhesive bonds used for bonding wood or other similar materials, when tested on a standard specimen under the subscribed conditions of preparation, conditioning and loading in compression. This test method is intended primarily as an evaluation for wood adhesives

Bond strength ASTM D4236

This practice describes the standard procedure for developing precautionary labels for art materials to provide chronic health hazard and precautionary statements based on knowledge that exists in the scientific and medical communities. These statements concern hazards known to be associated with a product or product component(s) when it is present in a physical form, volume, or concentration that in the opinion of a toxicologist has the potential to produce a chronic adverse health effect

Application Temperature
Above 10°C.

Open Assembly Time
4-6 minutes (21°C./50%RH)

Total Assembly Time
10-15 minutes (21°C./50%RH)

Minimum Required Spread
Approximately 6 square meters per Litre

Required Clamping Pressure
Enough to bring joints tightly together (generally, 100-150 psi for softwoods, 125-175 psi for medium woods and 175-250 psi for hardwoods)

Method of Application
Plastic bottles for fine applications; glue may also be spread with a roller spreader or brush.

Cleanup
Damp cloth while glue is wet. Scrape off and sand dried excess.

Titebond Original Wood Glue is not intended for exterior use or where moisture is likely. For exterior applications use Titebond III Ultimate Wood Glue or Titebond II Premium Wood Glue. Not for structural or load bearing applications. Do not use when temperature, glue or materials are below 10°C. Freezing may not affect the function of the product but may cause it to thicken. Agitation should restore product to original form. Read MSDS before use. KEEP FROM FREEZING. KEEP OUT OF THE REACH OF CHILDREN.

CAUTION: EYE AND SKIN IRRITANT. Do not swallow. Do not allow eye contact or prolonged skin contact. FIRST AID: If swallowed, do not induce vomiting; contact physician. If eye contact occurs, flush with water for 15 minutes. Wash skin contact areas with soap and water. If irritation from eye or skin contact persists, contact physician. For additional information, refer to Safety Data Sheet. KEEP OUT OF THE REACH OF CHILDREN.