Titebond Instant Bond is a two-part bonding system that takes between 5 - 15 seconds to set and 30 - 60 seconds for initial cure. It provides a strong, permanent bond and is ideal for hard to reach joints or surface areas that are difficult to clamp. Designed primarily for wood and wood products, this adhesive is also very effective on a wide variety of materials and substrates
Key performance benefits over other cyanoacrylate (CA) products on the market today:
|Part number||Size||Weight||UPC||Case UPC||Units per package||Packages per pallet|
|Storage life||2 years in tightly closed bottles stored between 4° & 24°C|
|Calculated VOC||20 g/L|
|Weight per gallon||4.17kg|
|Flashpoint||> 81° C|
5 second handling, 3 second set, 30 second cure. *Full cure in 8 hours.
Service Temperature Range
-54° to 93° C.
Use acetone. Follow solvent vendor’s precautions.
Titebond Instant Bond Wood Adhesive is not intended for exterior use or where moisture is likely. Store in a cool, dry place. Handling and set times may be affected by environmental conditions. For best results, apply adhesive between 13°C and 29°C. KEEP FROM FREEZING.
DANGER: COMBUSTIBLE LIQUID. Bonds skin, eye and other tissue instantly. Contains ethyl-2-cyanoacrylate. Irritating to eyes, skin and respiratory tract. Do not allow eye or skin contact. Avoid breathing vapours. Do not swallow. Keep away from sources of heat. FIRST AID: For eye contact, do not force eyes open. Flush eyes with water for 15 minutes and seek medical attention immediately. For skin contact, flush contact area with water and seek medical attention. If inhaled, remove to fresh air. Seek medical assistance if symptoms persist. Refer to Safety Data Sheet for additional information. KEEP OUT OF THE REACH OF CHILDREN