Instant Bond (Medium)

Titebond Instant Bond is a two-part bonding system that takes between 5 - 15 seconds to set and 30 - 60 seconds for initial cure. It provides a strong, permanent bond and is ideal for hard to reach joints or surface areas that are difficult to clamp. Designed primarily for wood and wood products, this adhesive is also very effective on a wide variety of materials and substrates.

The medium viscosity product offers an assembly time of 7 seconds and an initial cure speed of 5 seconds. In addition to typical bonding applications, it is ideal for filling knots and voids in wood, adhering pen tubes to blanks for pen turning applications, and for soaking end-grain to prevent splitting.

Key performance benefits over other cyanoacrylate (CA) products on the market today:

  • 2-year shelf life - Domestic production = fresher material
  • Superior quality - Triple-distilled for purity & consistency
  • Incredible strength - Over 4,000 psi tensil shear strength
  • Impact resistant - More flexible & less brittle
  • Service temperature range - From -53.8ºC to 93.3ºC (-65ºF to 200ºF)
  • Adhesive use only - Thin formula does NOT require activator
  • No-clog applicator - Easy to use & reduces waste
  • Neutralises the acidity in wood for consistent, uniform bonds
Where to buy

Features

  • Fast set – Eliminates clamping or reduces clamp time
  • Bonds stronger than wood
  • Excellent heat and solvent-resistance
  • Unaffected by finishes
  • Versatile – Bonds wood, MDF, acrylic, granite, natural rubber, PVC and more
  • 2 year shelf life
  • Triple distilled for purity & consistency
  • Impact-resistant
  • No-clog applicator for easy use and waste reduction
  • Adhesion of pen tubes to blanks in pen making
  • MIL Spec (A46050C) Type II, Class 2

Resources

Part number Size Weight UPC Case UPC Units per package Packages per pallet
506211 60ml 0.07kg 037083062113 10037083062110 15 210
Scroll right for more information
Type Ethyl cyanoacrylate
State Liquid
Colour Clear
Dried film Translucent
Solids 100%
Viscosity 120 cps
Storage life 2 years in tightly closed bottles stored between 4° & 24°C
Calculated VOC 20g/L
Weight per gallon 4.17kg
Chalk temperature N/A
Flashpoint > 81° C
Freeze/thaw stability Stable
pH N/A

Application Temperature
Above 10°C.

Cure Speed
7 second handling, 5 second set, 30 second cure. *Full cure in 8 hours.

Service Temperature Range
-54° to 93° C

Cleanup
Use acetone. Follow solvent vendor’s precautions

Titebond Instant Bond Wood Adhesive is not intended for exterior use or where moisture is likely. Store in a cool, dry place. Handling and set times may be affected by environmental conditions. For best results, apply adhesive between 12.7°C and 29.4°C. KEEP FROM FREEZING

DANGER: COMBUSTIBLE LIQUID. Bonds skin, eye and other tissue instantly. Contains ethyl-2-cyanoacrylate. Irritating to eyes, skin and respiratory tract. Do not allow eye or skin contact. Avoid breathing vapors. Do not swallow. Keep away from sources of heat. FIRST AID: For eye contact, do not force eyes open. Flush eyes with water for 15 minutes and seek medical attention immediately. For skin contact, flush contact area with water and seek medical attention. If inhaled, remove to fresh air. Seek medical assistance if symptoms persist. Refer to Safety Data Sheet for additional information. KEEP OUT OF THE REACH OF CHILDREN.