Quick N Thick

Titebond Quick & Thick Multi-Surface Glue is the thickest, fastest-drying water-based glue available for use with porous and semi-porous materials. It is ideal for wood, pottery, ceramic, stone, glass, fabrics, leather and most craft-type materials.

Titebond Quick & Thick Multi-Surface Glue provides a strong initial tack and fast speed of set, yet allows realignment of working pieces. It also develops a bond stronger than the wood itself, dries clear and is unaffected by finishes.

Where to buy


  • 2X Faster – 3X Thicker than traditional PVA glues
  • Dries clear – Paintable
  • Ideal for the woodshop, home and craft projects
  • Fill small cracks and gaps
  • Unaffected by finishes
  • Excellent sandability on wood
  • Designed for interior projects
  • Water cleanup & non-toxic
  • Nonflammable — No offensive odor
  • Conforms to ASTM D4236


Part number Size Weight UPC Case UPC Units per package Packages per pallet
512403 237ml 0.27kg 037083024036 10037083024033 12 160
Scroll right for more information
Type Thixotropic polyvinyl acetate
State High-viscosity liquid
Colour White
Dried film Clear
Solids 60%
Viscosity 36,500 cps
Storage life 24 months in tightly closed containers at 24°C
Calculated VOC 2.4g/L
Weight per gallon 4.08kg
Chalk temperature Approximately 10°C
Flashpoint > 93°C
Freeze/thaw stability Stable up to 2 cycles
pH 4.8

Application Temperature
Above 10°C.

Open Assembly Time
3-5 minutes (21°C./50%RH)

Total Assembly Time
10-15 minutes (21°C./50%RH)

Minimum Required Spread
Approximately 6 square meters per litre

Required Clamping Pressure
Enough to bring joints tightly together (generally, 100-150 psi for soft woods, 125-175 psi for medium woods and 175-250 psi for hardwoods)

Method of Application
Plastic bottles for fine applications; glue may also be spread with a roller, spreader or brush.

Damp cloth while glue is wet. Scrape off and sand dried excess.

Titebond Quick & Thick Multi-Surface Glue is not recommended for exterior use or where moisture is likely. For exterior applications, use Titebond III Ultimate Wood Glue or Titebond II Premium Wood Glue. Not for structural or load bearing applications. Not recommended for photos, washable wearables, metals, plastics or rubber. Do not use when temperature, glue or materials are below 10°C. Freezing may not affect the function of the product but may cause it to thicken. Agitation should restore product to original form. Read SDS before use. For wood, sand glued area thoroughly before staining. Store at room temperature. KEEP FROM FREEZING. KEEP OUT OF THE REACH OF CHILDREN.

No caution information is needed. Please refer to the Safety Data Sheet for further information.