Liquid hide

Type	Natural protein mixture
State	Liquid
Colour	Amber
Dried film	Translucent
Solids	52%
Viscosity	4,000 cps
Storage life	24 months in tightly closed containers at 24°C
Calculated VOC	0 g/L
Weight per gallon	4.35kg
Chalk temperature	N/A
Flashpoint	> 93°C
Freeze/thaw stability	Stable
pH	6.5

Bond strength Green Seal GS-36 Woodworking Glues

The standard includes product performance requirements and environmental and health requirements such as reduced toxicity, hazardous ingredients, and volatile organic compounds (VOCs).

Bond strength ASTM D905 (on hard maple)

This test method covers the determination of the comparative shear strengths of adhesive bonds used for bonding wood and other similar materials, when tested on a standard specimen under specified conditions of preparation, conditioning, and loading in compression. This test method is intended primarily as an evaluation of adhesives for wood. This specification is designed to cover comparative shear strengths of adhesive bonds used for bonding wood or other similar materials, when tested on a standard specimen under the subscribed conditions of preparation, conditioning and loading in compression. This test method is intended primarily as an evaluation for wood adhesives

Bond strength ASTM D4236

This practice describes the standard procedure for developing precautionary labels for art materials to provide chronic health hazard and precautionary statements based on knowledge that exists in the scientific and medical communities. These statements concern hazards known to be associated with a product or product component(s) when it is present in a physical form, volume, or concentration that in the opinion of a toxicologist has the potential to produce a chronic adverse health effect

Application Temperature
Above 10°C.

Open Assembly Time
10 minutes (21°C./50% RH)

Total Assembly Time
20-30 minutes (21°C./50%RH)

Minimum Required Spread
Approximately 6 square meters per litre

Required Clamping Pressure
Enough to bring joints tightly together (generally, 100-150 psi for softwoods, 125-175 psi for medium woods and 175-250 psi for hardwoods)

Method of Application
Can be applied by roller or dip spreader, pressurised oil cans, plastic applicators, brush or stick.

Cleanup
Damp cloth while glue is wet. Scrape off and sand dried excess.

Titebond Liquid Hide Glue is not intended for exterior use or where moisture is likely. Not for structural or load bearing applications. For exterior applications use Titebond III Ultimate Wood Glue or Titebond II Premium Wood Glue. Freezing may not affect the function of the product but may cause it to thicken. Agitation should restore product to original form. KEEP FROM FREEZING.

CAUTION: EYE IRRITANT. Contains ammonium rhodanate; dicyanodiamide. Contact with eye will cause irritation. Do not take internally. Not intended for use by children. If eye contact occurs, rinse with running water for at least 15 minutes. If ingested do not induce vomiting. Seek medical attention if eye irritation or gastric distress occurs. For additional information, refer to Safety Data Sheet. KEEP OUT OF THE REACH OF CHILDREN